Glass Lined Reactor (electricity heating type)
|Purchase Qty. (Pieces)||FOB Price|
|1||US $4,500 / Piece|
|2+||US $4,400 / Piece|
1.The thermal oil inside the reactor jacket should be pure and can not be mixed with water,acid,alkali and other kinds of inpurities.
2.Clean the reactor jacket before first usage.Add thermal oil (about 85% of the jacket capacity) into the jacket.
3.Don't heat the glass lined reactor when there is no raw materials inside the reactor or no thermal oil inside it.
4.Heat Slowly to raise the temperature slowly,to prevent from oil bumping.
5.If the glass lined reactor is equipped with a control cabinet,the user could control the heating temperature and holding time by control cabinet.
6.Often check the thermal oil in jacket and add thermal oil timely.
7.Often check the electricity heating rods to prevent from uneven heating.
8. Expansion Device is optional.It should be connected with the connection hole on the jacket and used for storing expanded hot thermal oil.Of course,the user could connect the hole with a high-temperture tube to replace the expansion device.
9.The glass lined reactor can be used to heat from 0~200 degree centrigrade.
|2||Full Capacity (L)||71||128||247||369||588||1250||1720||2160||3715||5650|
|4||Heat Transfer Area|
|5||Seal Type||Packing Seal or Mechanical Seal|
|6||Stirrer Type||Anchor Type||Frame Type,Anchor Type and so on|
|Cycloidal Pin Wheel Speed Reducer or Explosive-proof Motor|
|The user could choose a frequency converter to adjust the rotation speed.|
|9||Design Temperature||0~200 Degree Centrigrade|
|10||Heating Methods||Steam Heating Reactor||Electricity Heating Reactor|
(Electricity Heating Type)