Glass Lined Reactor for Dyes
|Purchase Qty. (Pieces)||FOB Price|
|1-2||US $5,100 / Piece|
|3+||US $4,900 / Piece|
1)Temperature should be slowly changed during cooling or heating to avoid damaging glass layer.
2)Glass lined reactor with motor can not be used in hydrofluoric acid, medium containing fluorine, phosphoricacid, and alkali concentration greater -than 30% and temperature greater-than or equal 180 Degree Cent.
3)Separate the cover from the reactor, and correct the level with a level ruler.
4)The man who will enter into the reactor must wear soft shoes and put some elastic materials inside the reactor.
5)Put the gasket in the middle of the flange to keep the distance between the edge of the gasket and flange is equal.
6)Install the anti-loose parts (see Figure 1) when installing the stirrer and speed reducer. Check the motor rotation direction and must not let the stirrer rotate in reversal direction.
7)Fasten the clamp bolts diagonally.
8)Install the thermometer, pressure gauge or safety valve.
|2||Full Capacity (L)||71||128||247||369||588||1250||1720||2160||3715||5650|
|4||Heat Transfer Area|
|5||Seal Type||Packing Seal or Mechanical Seal|
|6||Stirrer Type||Anchor Type||Frame Type,Anchor Type and so on|
|Cycloidal Pin Wheel Speed Reducer or Explosive-proof Motor|
|The user could choose a frequency converter to adjust the rotation speed.|
|9||Design Temperature||0~200 Degree Centrigrade|
|10||Heating Methods||Steam Heating Reactor||Electricity Heating Reactor|
(Electricity Heating Type)