This is a complete set of equipment for mixing. It consists of the working platform, a mixer, a storage tank and a packing machine.
1.Manual Control Devices:
Based on operation experiences and production costs, the above four devices need to be operated manully,it means that you need the worker to operate the control cabinet to finish the devices on or off.Just operate the control system by man.
2.Automatic control devices:
1)Two Screw Conveyors (under the 6 m³ Silos);
2)Weigher (3 KW);
3)Bucket Elevator for the mixer (7.5 KW);
4)Mixer(18.5KW)
5)Ribbon Mixer for second mixing(7.5 KW)
3.Control Procedure:
(1)The silo has the vibration system and level gauges.The vibration system is helpful to clean the raw materials on the wall of the silos.The level gauges are placed on the highest and lowest position of the silos.They will warn once the raw materials rich the highest or lowest level.
(2)The control cabinet has the buttons for the Bucket Elevator One,Dust Collector,Air Compressor and the packing machine.
(3)The worker fills the two silos by pressing the buttons on the Control Cabinet.Then transfer the Manual or Automatic Button in Automatic direction,then the control cabinet will finish the following procedure automatically.
1)Automatically turn on the Screw Conveyor A to discharge material to your demand weight and then close the Screw Conveyor A;
2)Automatically turn on the Screw Conveyor B to discharge material to your demand weight and then close the Screw Conveyor B;
3)Automatically turn on the Weigher to discharge,at the same time,automatically turn on the Bucket Elevator Two to convey materials to the Premixing Silo and automatically turn on the Weightless Mixer.
4)When the Weigher has completely been discharged,the motor on the weigher will be turned off, and after about 10 seconds the motor of the Bucket Elevator Two will be turned off,too.
5)There are valves on the Premixing Silo and Main Mixer,and the valves can be controlled on the Control Cabinet.When the mixer is working ,the valve is closed.
6)When the mixing time is reached,automatically open the discharging valve and turn on the ribbon mixer to be mixed again.
(4)At last the worker presses the button on the control cabinet to turn on the packing machine.
(5)If necessary,the worker could turn on the buttons on the control cabinet to let the dust collector to work.
|
Name |
Specification |
Quantity |
| 1 |
Screw Conveyor |
Φ219Χ4.8 m |
2 |
| 2 |
Bucket Elevator for Mixing |
DT250Χ10.8 m |
1 |
| 3 |
Weightless Mixer |
2 m³ |
1 |
| 4 |
Finished Product Silo |
1.5 m³ |
1 |
| 5 |
Ribbon Mixer(second mixing) |
500L |
1 |
| 6 |
Weigher |
1.5 m³ |
1 |
| 7 |
Control System |
|
1 |
| 8 |
Bucket Elevator for Feeding |
DT250Χ15.1 m |
1 |
| 9 |
Packing Machine |
6-8 tons/hour |
1 |
| 10 |
Gas Storage Tank |
1000 L |
1 |
| 11 |
Transition Silo |
2000 L |
1 |
| 12 |
Dust Collector |
20 m³ |
1 |
| 13 |
Small Silo |
150L |
1 |
| 14 |
Parts |
|
1 |
| 15 |
Working Platform |
|
1 |
| 16 |
Silo |
6 m³ |
2 |
Audited Supplier 
){kind=link}